Visual Comfort

A wall turn attaches to a surface to make simple turns.Width: 1.00"Height: 0.50"Length: 0.50"Weight: 0.20 lb, Included

The "T" connector joins three pieces of MonoRail to form a "T".Width: 3.00"Height: 1.80"Weight: 1.00 lb, Included

Stylish satin nickel turnbuckle.Width: 1.50"Height: 1.00"Length: 1.00"Weight: 0.40 lb, Included

For short, straight runs (runs under 20').Width: 1.50"Height: 1.00"Length: 1.00"Weight: 0.15 lb, Included

Mounts to ceiling.Width: 5.50"Height: 2.50"Length: 5.50"Weight: 0.25 lb, Included

The "X" connector joins four pieces of MonoRail to form an "X".Width: 3.00"Height: 1.80"Weight: 1.00 lb, Included

To install a MonoRail system to a vaulted ceiling, add a standoff vault adapter to each standoff.Width: 6.00"Height: 1.60"Weight: 0.25 lb, Included

To install a MonoRail system to a vaulted ceiling, add a power vault adapter to each power feed.Width: 0.60"Height: 1.60"Length: 0.60"Weight: 0.10 ...

Add to power feed canopy or surface transformer to drop power from ceiling.Width: 0.50"Height: 3.00"Length: 0.50"Weight: 0.25 lb, Included

Isolating connectors join sections of rail and isolate power feeds from each other.Width: 1.10"Height: 0.30"Length: 1.10"Weight: 0.01 lb, Included

Adapts any FreeJack head or pendant to VC Modern's MonoRail system.Width: 7.00"Height: 1.40"Length: 0.70"Weight: 0.10 lb, Included

These conductive connectors join sections of rail together end to end at desired sharp horizontal angle.Width: 3.00"Height: 2.00"Length: 3.00"Weigh...

Conductive connectors join sections of rail together end to end and are included with all MonoRail pieces.Width: 1.10"Height: 0.30"Length: 1.10"Wei...

Center Power Feeds are generally used to bring power to a MonoRail system when the transformer or canopy cannot be located directly above the run.W...

A single-feed canopy is mounted to the ceiling above the MonoRail run.Width: 4.50"Height: 2.00"Length: 4.50"Weight: 0.95 lb, Included

The MonoRail Low-Profile Power Feed Canopy allows for the closest-to-ceiling possible mounting of a MonoRail run.Width: 4.50"Height: 1.00"Length: 4...

A dual-feed canopy is mounted to the ceiling above the MonoRail run.Width: 4.00"Height: 2.50"Length: 4.00"Weight: 0.95 lb, Included

A direct-end power feed brings power from a remote transformer to the rail at an end of the run and mounts to a wall perpendicular to the run.Width...

Low-voltage conductor of two individual conductive metal pieces fused together by a plastic separator.Width: 0.30"Height: 0.60"Length: 24.00"Weight...

A single-feed canopy is mounted to a wall or ceiling adjacent to the Kable Lite run.Width: 2.50"Height: 24.00"Length: 3.60"Weight: 1.10 lb, Included

Insulated cable is #10 gauge, tin-plated copper cable sheathed in clear insulation.Width: 0.16"Height: 0.16"Length: 0.16"Weight: 0.15 lb, Included

4" round and 4" square canopies mounts to a standard 4" junction box with round plaster ring (provided by electrician).Width: 4.40"Height: 0.80"Len...

Minimal 1-1/2" diameter, 2-1/2" deep.Width: 0.20"Height: 2.50"Length: 2.00"Weight: 0.50 lb 60.00W, Included

Mounts to a standard 4" junction box with round plaster ring (provided by electrician).Width: 4.00"Height: 0.50"Length: 4.00"Weight: 2.00 lb 60.00W...

Decorative end caps fit into ends of MonoRail run for a finished look.Width: 0.30"Height: 0.30"Length: 0.30"Weight: 0.01 lb, Included

Light bars can be mounted vertically or horizontally and rotate 360 degrees to aim light in your preferred direction. Use connectors to link multip...

End caps are requred to finish each run.Width: 0.90"Height: 1.00"Length: 1.00"Weight: 0.20 lb, Included

Wall Connector provides design flexibility to mount light bars on wall or ceiling. To accomodate all design needs, connectors are available in vari...

Blank Bars are great options for design versatility. Blanks provide unilluminated sections of the system and can connect to illuminated bars (light...

Mounts to any connector to provide additional support.Width: 1.00"Height: 1.10"Length: 1.00"Weight: 0.20 lb, Included

Clip on connectors or bars to provide support anywhere along the run.Width: 0.35"Height: 1.50"Length: 1.25"Weight: 0.20 lb, Included

Bare cable is #10 gauge tin-plated copper cable.Width: 0.10"Height: 0.10"Length: 0.10"Weight: 0.15 lb, Included